dmesg - ARMv7 rev 3
Booting Linux on physical CPU 0x100
Linux version 4.9.27-35 (root@1604_builder_armhf) (gcc version 4.9.4 (Ubuntu/Linaro 4.9.4-2ubuntu1~16.04) ) #1 SMP PREEMPT Tue May 9 22:16:51 UTC 2017
CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hardkernel Odroid XU4
cma: Reserved 128 MiB at 0xb6800000
Memory policy: Data cache writealloc
Samsung CPU ID: 0xe5422001
On node 0 totalpages: 518656
free_area_init_node: node 0, pgdat c0c4ba00, node_mem_map eee25000
Normal zone: 1728 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 196608 pages, LIFO batch:31
HighMem zone: 322048 pages, LIFO batch:31
Running under secure firmware.
percpu: Embedded 14 pages/cpu @eed7f000 s26700 r8192 d22452 u57344
pcpu-alloc: s26700 r8192 d22452 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516928
hdmi: using HDMI mode
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1902556K/2074624K available (7168K kernel code, 305K rwdata, 2012K rodata, 1024K init, 306K bss, 40996K reserved, 131072K cma-reserved, 1157120K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0800000 (8160 kB)
.init : 0xc0b00000 - 0xc0c00000 (1024 kB)
.data : 0xc0c00000 - 0xc0c4c660 ( 306 kB)
.bss : 0xc0c4e000 - 0xc0c9aa8c ( 307 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
hperf_hmp: fast CPUs mask: 000000F0
hperf_hmp: slow CPUs mask: 0000000F
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:16 nr_irqs:16 16
Switching to timer-based delay loop, resolution 41ns
clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 551
CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
Setting up static identity map for 0x40100000 - 0x40100058
ARM CCI driver probed
Exynos MCPM support installed
CPU1: update cpu_capacity 551
CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
CPU2: update cpu_capacity 551
CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
CPU3: update cpu_capacity 551
CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
CPU4: update cpu_capacity 1496
CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
CPU5: update cpu_capacity 1496
CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
CPU6: update cpu_capacity 1496
CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
CPU7: update cpu_capacity 1496
CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 8 CPUs
SMP: Total of 8 processors activated (384.00 BogoMIPS).
CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
CPU: This may indicate a broken bootloader or firmware.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
hperf_hmp: registered cpufreq transition notifier
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
exynos-audss-clk 3810000.audss-clock-controller:: epll 180633609
iommu: Adding device 10850000.g2d: to group 0
iommu: Adding device 11000000.codec: to group 1
iommu: Adding device 14450000.mixer: to group 2
iommu: Adding device 11c00000.rotator: to group 3
iommu: Adding device 13e00000.video-scaler: to group 4
iommu: Adding device 13e10000.video-scaler: to group 5
iommu: Adding device 11f50000.jpeg: to group 6
iommu: Adding device 11f60000.jpeg: to group 7
EXYNOS5420 PMU initialized
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c 12c70000.i2c:: slave address 0x00
s3c-i2c 12c70000.i2c:: bus frequency set to 378 KHz
s3c-i2c 12c70000.i2c:: i2c-1: S3C I2C adapter
s3c-i2c 12c80000.i2c:: slave address 0x00
s3c-i2c 12c80000.i2c:: bus frequency set to 65 KHz
s3c-i2c 12c80000.i2c:: i2c-2: S3C I2C adapter
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource mct-frc
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9300K (c2000000 - c2915000)
workingset: timestamp_bits=14 max_order=19 bucket_order=5
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
12130000.phy: supply vbus not found, using dummy regulator
12100000.phy: supply vbus not found, using dummy regulator
12100000.phy: supply vbus-boost not found, using dummy regulator
12500000.phy: supply vbus not found, using dummy regulator
12500000.phy: supply vbus-boost not found, using dummy regulator
dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
random: fast init done
console [ttySAC2] enabled
[drm] Initialized
exynos-hdmi 14530000.hdmi:: Failed to get supply 'vdd': -517
s5p-g2d 10850000.g2d:: The Exynos G2D (ver 4.1) successfully probed.
exynos-rot 11c00000.rotator:: The exynos rotator is probed successfully
exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
mali 11800000.mali:: GPU identified as 0x0620 r0p1 status 0
devfreq 11800000.mali:: Couldn't update frequency transition information.
mali 11800000.mali:: could not find power_model node
mali 11800000.mali:: Probed as mali0
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
usbcore: registered new interface driver r8152
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_subset
exynos-dwc3 soc:usb3-0:: no suspend clk specified
exynos-dwc3 soc:usb3-1:: no suspend clk specified
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-exynos: EHCI EXYNOS driver
exynos-ehci 12110000.usb:: EHCI Host Controller
exynos-ehci 12110000.usb:: new USB bus registered, assigned bus number 1
exynos-ehci 12110000.usb:: irq 91, io mem 0x12110000
exynos-ehci 12110000.usb:: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.27-35 ehci_hcd
usb usb1: SerialNumber: 12110000.usb:
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-exynos: OHCI EXYNOS driver
exynos-ohci 12120000.usb:: USB Host Controller
exynos-ohci 12120000.usb:: new USB bus registered, assigned bus number 2
exynos-ohci 12120000.usb:: irq 91, io mem 0x12120000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: USB Host Controller
usb usb2: Manufacturer: Linux 4.9.27-35 ohci_hcd
usb usb2: SerialNumber: 12120000.usb:
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
LDO27: mapping for mode 1 not defined
LDO28: mapping for mode 1 not defined
LDO30: mapping for mode 1 not defined
vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
vdd_sd: Bringing 3300000uV into 2800000-2800000uV
vdd_ldo30: Bringing 1800000uV into 3300000-3300000uV
s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
s5p-jpeg 11f50000.jpeg:: encoder device registered as /dev/video0
s5p-jpeg 11f50000.jpeg:: decoder device registered as /dev/video1
s5p-jpeg 11f50000.jpeg:: Samsung S5P JPEG codec
s5p-jpeg 11f60000.jpeg:: encoder device registered as /dev/video2
s5p-jpeg 11f60000.jpeg:: decoder device registered as /dev/video3
s5p-jpeg 11f60000.jpeg:: Samsung S5P JPEG codec
s5p-mfc 11000000.codec:: preallocated 16 MiB buffer for the firmware and context buffers
s5p-mfc 11000000.codec:: decoder registered as /dev/video10
s5p-mfc 11000000.codec:: encoder registered as /dev/video11
s3c2410-wdt 101d0000.watchdog:: watchdog inactive, reset disabled, irq disabled
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
core: _opp_supported_by_regulators: OPP minuV: 1135000 maxuV: 1135000, not supported by regulator
cpu cpu0: _opp_add: OPP not supported by regulators (1100000000)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
dwmmc_exynos 12200000.mmc:: IDMAC supports 32-bit address mode.
dwmmc_exynos 12200000.mmc:: Using internal DMA controller.
dwmmc_exynos 12200000.mmc:: Version ID is 250a
dwmmc_exynos 12200000.mmc:: DW MMC controller at irq 94,64 bit host data width,64 deep fifo
dwmmc_exynos 12200000.mmc:: Got CD GPIO
dwmmc_exynos 12200000.mmc:: allocated mmc-pwrseq
usb 2-1: new low-speed USB device number 2 using exynos-ohci
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
dwmmc_exynos 12200000.mmc:: 1 slots initialized
dwmmc_exynos 12220000.mmc:: IDMAC supports 32-bit address mode.
dwmmc_exynos 12220000.mmc:: Using internal DMA controller.
dwmmc_exynos 12220000.mmc:: Version ID is 250a
dwmmc_exynos 12220000.mmc:: DW MMC controller at irq 95,64 bit host data width,64 deep fifo
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
dwmmc_exynos 12220000.mmc:: 1 slots initialized
s5p-secss 10830000.sss:: s5p-sss driver registered
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
exynos-nocp: new NoC Probe device registered: 10ca1000.nocp:
exynos-nocp: new NoC Probe device registered: 10ca1400.nocp:
exynos-nocp: new NoC Probe device registered: 10ca1800.nocp:
exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp:
odroid-audio sound:: dit-hifi 3830000.i2s: mapping ok
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
registered taskstats version 1
Key type encrypted registered
usb 2-1: New USB device found, idVendor=04b3, idProduct=310c
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
usb 2-1: Product: USB Optical Mouse
[drm] Exynos DRM: using 14450000.mixer: device for DMA mapping operations
exynos-drm exynos-drm: bound 14450000.mixer: (ops 0xc084dc20)
exynos-drm exynos-drm: bound 14530000.hdmi: (ops 0xc084ddf8)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
mmc1: new ultra high speed DDR50 SDHC card at address aaaa
input: USB Optical Mouse as /devices/platform/soc:/12120000.usb:/usb2/2-1/2-1:1.0/0003:04B3:310C.0001/input/input0
hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-12120000.usb:-1/input0
mmcblk1: mmc1:aaaa SS08G 7.40 GiB
mmcblk1: p1 p2
Console: switching to colour frame buffer device 240x67
exynos-drm exynos-drm: fb0: frame buffer device
mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1)
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 DG4064 59.2 GiB
mmcblk0boot0: mmc0:0001 DG4064 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4064 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4064 partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4
[drm] Initialized exynos 1.0.0 20110530 on minor 0
exynos-dwc3 soc:usb3-0:: no suspend clk specified
xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
xhci-hcd xhci-hcd.2.auto: irq 143, io mem 0x12000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.27-35 xhci-hcd
usb usb3: SerialNumber: xhci-hcd.2.auto
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.27-35 xhci-hcd
usb usb4: SerialNumber: xhci-hcd.2.auto
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
exynos-dwc3 soc:usb3-1:: no suspend clk specified
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
xhci-hcd xhci-hcd.5.auto: irq 144, io mem 0x12400000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.27-35 xhci-hcd
usb usb5: SerialNumber: xhci-hcd.5.auto
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.9.27-35 xhci-hcd
usb usb6: SerialNumber: xhci-hcd.5.auto
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
s3c-rtc 101e0000.rtc:: rtc disabled, re-enabling
s3c-rtc 101e0000.rtc:: warning: invalid RTC value so initializing it
rtc rtc1: invalid alarm value: 1900-1-2 0:0:0
s3c-rtc 101e0000.rtc:: rtc core: registered s3c as rtc1
exynos-bus: new bus device registered: soc:bus_wcore: ( 84000 KHz ~ 400000 KHz)
exynos-bus: new bus device registered: soc:bus_noc: ( 67000 KHz ~ 100000 KHz)
exynos-bus: new bus device registered: soc:bus_fsys_apb: (100000 KHz ~ 200000 KHz)
exynos-bus: new bus device registered: soc:bus_fsys: (100000 KHz ~ 200000 KHz)
exynos-bus: new bus device registered: soc:bus_fsys2: ( 75000 KHz ~ 150000 KHz)
exynos-bus: new bus device registered: soc:bus_mfc: ( 96000 KHz ~ 333000 KHz)
exynos-bus: new bus device registered: soc:bus_gen: ( 89000 KHz ~ 267000 KHz)
exynos-bus: new bus device registered: soc:bus_peri: ( 67000 KHz ~ 67000 KHz)
exynos-bus: new bus device registered: soc:bus_g2d: ( 84000 KHz ~ 333000 KHz)
exynos-bus: new bus device registered: soc:bus_g2d_acp: ( 67000 KHz ~ 267000 KHz)
exynos-bus: new bus device registered: soc:bus_jpeg: ( 75000 KHz ~ 300000 KHz)
exynos-bus: new bus device registered: soc:bus_jpeg_apb: ( 84000 KHz ~ 167000 KHz)
exynos-bus: new bus device registered: soc:bus_disp1_fimd: (120000 KHz ~ 200000 KHz)
exynos-bus: new bus device registered: soc:bus_disp1: (120000 KHz ~ 300000 KHz)
usb 3-1: new high-speed USB device number 2 using xhci-hcd
exynos-bus: new bus device registered: soc:bus_gscl_scaler: (150000 KHz ~ 300000 KHz)
exynos-bus: new bus device registered: soc:bus_mscl: ( 84000 KHz ~ 400000 KHz)
input: gpio_keys: as /devices/platform/gpio_keys:/input/input1
Power domain power-domain@10044120 disable failed
s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01 00:00:07 UTC (946684807)
ALSA device list:
#0: odroid-snd
Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
usb 3-1: Manufacturer: GenesysLogic
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 2 ports detected
usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
usb 4-1: New USB device found, idVendor=05e3, idProduct=0616
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.0 Hub
usb 4-1: Manufacturer: GenesysLogic
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 2 ports detected
usb 3-1.1: new low-speed USB device number 3 using xhci-hcd
usb 3-1.1: New USB device found, idVendor=045e, idProduct=078c
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: USB Keyboard
usb 3-1.1: Manufacturer: LITEON Technology
input: LITEON Technology USB Keyboard as /devices/platform/soc:/soc:usb3-0:/12000000.dwc3:/xhci-hcd.2.auto/usb3/3-1/3-1.1/3-1.1:1.0/0003:045E:078C.0002/input/input2
hid-generic 0003:045E:078C.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-xhci-hcd.2.auto-1.1/input0
usb 3-1.2: new high-speed USB device number 4 using xhci-hcd
usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-1: Product: USB 10/100/1000 LAN
usb 6-1: Manufacturer: Realtek
usb 6-1: SerialNumber: 000001000000
usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
r8152 6-1:1.0 eth0: v2.08.0 (2016/12/09)
r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
usb 3-1.2: New USB device found, idVendor=046d, idProduct=0843
usb 3-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 3-1.2: Product: Logitech Webcam C930e
usb 3-1.2: SerialNumber: 9D1DE9FE
random: crng init done
EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
systemd[1]: System time before build time, advancing clock.
NET: Registered protocol family 10
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture arm.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on udev Control Socket.
EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[279]: Received request to flush runtime journal from PID 1
gpiomem-exynos 13400000.gpiomem:: Initialised: GPIO register area is 2
gpiomem-exynos 13400000.gpiomem:: Initialised: Registers at 0x13400000
gpiomem-exynos 13400000.gpiomem:: Initialised: Registers at 0x14010000
uvcvideo: Found UVC 1.00 device Logitech Webcam C930e (046d:0843)
uvcvideo 3-1.2:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 11 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Extension 13 was not initialized!
uvcvideo 3-1.2:1.0: Entity type for entity Camera 1 was not initialized!
input: Logitech Webcam C930e as /devices/platform/soc:/soc:usb3-0:/12000000.dwc3:/xhci-hcd.2.auto/usb3/3-1/3-1.2/3-1.2:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver snd-usb-audio
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.26)
usb 3-1.2: reset high-speed USB device number 4 using xhci-hcd
EXT4-fs (mmcblk0p4): recovery complete
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p3): recovery complete
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1.2: USB disconnect, device number 4